TouchTheVideo Plus supports picture-in-picture and background audio playback. This section describes how to set them up and the differences in behavior depending on the settings. Setting Picture-in-picture and background audio settings can be found in the app under Settings > Video Viewer > Background. It can also be set from the video viewer’s upper right menu > Video Viewer Settings > Background. Background audio playback Sets whether or not audio-only playback will continue when the application goes to the background or goes to sleep. Incidentally, if this setting is OFF, the speaker will not emit sound when the mute switch is ON the sound will not come out from the … Continue reading →

Changed in Ver. 1.2. Edit mode “Edit” in the function menu switches to edit mode. The close button in the expansion area exits edit mode.   Edit Item Aspect Tap to select from [Original Aspect],[16:9],[3:2],[4:3],[1:1],[4:5],[3:4],[2:3],[9:16],[Custom]. Resolution Tap to select a typical resolution based on the original resolution and aspect. If the original aspect is a special aspect, or if [Custom] is selected in the aspect settings , you can choose from [Original Resolution],[75%],[50%],[25%],[Custom Resolution]. If [Custom Resolution] is selected, a resolution input dialog box will appear. Enter a resolution such as “1024×576”. Media Type Photo and video can be selected. When you select a video, you can choose a duration … Continue reading →

When the speed effect is opened, the event list appears. Event Registration Seek with scrub bar or playback control to event location. Add an event with the “+” button. Change Parameters Time This is the start time of that event. The time of the first event is the start time. Tap the time item for each event, and the time display will change to “Set”. In this state, move the time with the scrub bar or other device, and tap “Set” to change and save the time. Pause Specify the stop time (in seconds) at that time. Tap the Pause item for each event to display the input panel. 0 … Continue reading →

Tap the “Adjust Colors” item to display the Adjust Colors panel.     Tap the “ON” button to activate the adjustment.   Touching the numeric buttons further changes the display of the setting item, and the setting for that item can be set using the setting slider, fine-tuning -, fine-tuning +, reset, and so on. Adjustment items include brightness, contrast, highlight, shadow, saturation, and hue.   When adjustments are complete, use “Back” to return to editing.

When you open the Pan and Zoom settings, you will see a list of keyframes. A keyframe at time 0 is registered as the default setting. Time Key frame time Position Zoom magnification, angle, and offset are displayed. “x1.00 0.00° (0.00,0.00)” is the initial value and has not been changed. Position Change Touch the position to display the pan/zoom setting panel. Zoom magnification, angle, and position can be set on this panel. Touching the yellow number buttons changes the display of the setting item, and the setting for that item can be set with the setting slider, fine-tune -, fine-tune +, reset, etc.。   Zooming and offsetting can be performed … Continue reading →

Changed in Ver. 1.2. Edit mode “Edit” in the function menu switches to edit mode. The close button in the expansion area exits edit mode. Edit Item Aspect Tap to select from [Original Aspect],[16:9],[3:2],[4:3],[1:1],[4:5],[3:4],[2:3],[9:16],[Custom]. Resolution Tap to select a typical resolution based on the original resolution and aspect. If the original aspect is a special aspect, or if [Custom] is selected in the aspect settings , you can choose from [Original Resolution],[75%],[50%],[25%],[Custom Resolution]. If [Custom Resolution] is selected, a resolution input dialog box will appear. Enter a resolution such as “1024×576”. Pan and Zoom Tap to enter “Pan/Zoom edit mode”. See “Edit – Pan and Zoom” for details. Adjust Colors … Continue reading →

Marker mode Tap the [Marker] button to enter marker mode and display the marker list. Tap the size button to use the full screen in marker mode.   Marker Control Screen   marker button [Mark] is displayed during playback. – Tap：One-touch marker / Registers a marker for a fixed time period. – Long press：The marker is registered from the time when the button is pressed to the time when it is released. – Slide right：The [OUT] indicator appears and registers the marker in the period of time until the next tap. When registering while playing, the timing of the press is slightly later, so the time is registered at an … Continue reading →

Changed in Ver. 1.2. Screen Structure Volume/Capture During playback : Volume buttons Tap to display the volume slider. Tap again to make it disappear. When paused : Capture button Save the frame image in jpeg during posing.   seek bar Touching the playback position will seek to that position.   end mode Changes the behavior at the end of playback. You can choose to “exit player”, “replay”, or “pause”. Default selection can be set in “Setting” > “Video Viewer” > “Play by item selection” > “End Playing”.   marker mode Tap to enter marker mode and become a marker button.   scrub bar Video thumbnails and sound pressure levels are … Continue reading →

This page describes the common features of the Video Viewer and Photo Viewer. Screen Display Mode Tap the center of the screen to switch between three display modes. control display This mode indicates the position of control buttons, etc. These controls are also hidden in other modes, but they are still operational. Content only This mode displays nothing but content. information display Displays title, memo, tags, creation date and time, and shooting location. Common Controls Although the types of controls vary depending on the type of content, common controls are described here. checkbox Touch to turn the check mark on and off. size button Touch to switch between full screen … Continue reading →